Trying to do a background check on the latest golf clubs? Save yourself time and effort. Have a look at these inexpensive ways to source good golf clubs.

Watch the professionals

During the course of a golf tournament on TV you get to see what kind of golf clubs your idols use. Observe how they use these clubs, and what clubs they use during different situations. This gives you a general idea or conceptual framework that you can use in the future. Usually the commentator covering the event will give a narrative and or an explanation as to why your golf player used a particular club.

Use the internet for research

Do not be afraid to go online. The internet is a rich source of information. There are thousands of articles on how to choose the right golf club. Feel free to look around some of them and absorb what these articles have to say. Based on your specific needs, just retain what you feel is apt for your situation and discard the information that you think is not applicable to you.

Join an online forum

Being in an online forum gives you an interactive approach to information acquisition. You can ask online your questions about golf clubs and the different issues you wish to tackle related to this item. Other knowledgeable players who log on to the forum will be willing to help you out. Another advantage of joining a forum is you can tap into the experiences of different golf practitioners around the globe. Best of all, this is free! The majority of forums do not require a charge. All you will need is a computer, a good connection to the internet, and an inquisitive mind.

Ask your experienced friends who play the game

Not finding a friend who plays golf is close to impossible. All of us have at least one friend who is into the sport. Go ahead and ask them about their opinion and experiences on their golf club, and seek their advice on what tips they can give. Learning from the first hand encounters of others can be made to your advantage.

If there is a will then there is a way. You can learn more about golf clubs without investing in money at all.

This is the best approach to obtain high quality clubs that are right for you personally. It is also the best way for most golfers to improve their games. The cost savings you would achieve in the other approaches will be gone, but you will have high quality clone golf clubs that fit your swing. Do top PGA Tour players use off-the-shelf standard clubs? Not on your life. Even though they endorse certain brands and use clubs from their sponsors, those clubs have been modified and customized for each player. If the best players in the world need to have their clubs customized for their individual swings, wouldn&’t it benefit you as well, whose swing is less perfect? If you have a set of clubs made by a professional club maker/fitter who is certified by PCS (the Professional Clubmaker&’s Society- try to find a PCS Class A clubmaker) or the GCA (Golf Clubmaker&’s Assoc.), you will receive a set of clubs that will get everything possible out of your game. If this approach is beyond the means of your budget, it is possible to do a club fitting on-line. If you can find a professional accredited clubmaker from one of the two professional organizations mentioned above who offers on-line fitting and clubmaking services, that solution would be your best bet. To identify such a person, look on the web site of the PCA.

Some Basics Before Buying Clubs

Your professional club maker will collect a certain amount of data before choosing the components to make your clone golf clubs, and you should know this information even if you buy a set of standard, off-the-shelf clubs. He&’ll measure your swing speed with both a driver and five iron. He&’ll measure the distance from the floor to the top of our wrist to determine the proper length for your clubs (most standard clubs are too long). He will observe your swing and determine the proper loft for your driver and other clubs (most golfers use a driver with too little loft). He&’ll determine if you normally slice or fade the ball and make necessary adjustments in the club face settings. He&’ll ensure you have the proper lie angle on your irons, which can dramatically improve accuracy. In all there are more than two dozen adjustments a club maker can vary to optimize clubs for your swing, although of course some are more important than others.

Conclusion

You can approach procuring a set of clone golf clubs in three ways. You can simply find a web site that sells cheap clones, you can purchase quality components and assemble them yourself, or you can go to a certified professional club maker/fitter and get the best set possible for your game. Even if you can&’t afford the latter approach, you should at least know your swing speeds in order to choose proper shafts, and you should get clubs that are the proper length and correct loft for your size and swing. In addition, I would highly recommend that anyone looking to invest in a new set of golf clubs read Tom Wishon&’s book, &’The Search for the Perfect Golf Club&’.

Taylor Made&’s metalwood golf clubs boast of the following models with features that surely makes each golf club a hit to golfers:

R7 Fairway Woods is the Taylor Made golf club, which is with Taylor Made Launch Control (TLC) Port. TLC cartridges can be installed and removed to permit users in changing the CG location to vary the degrees of draws and fades that will consequently promote more accuracy and distance.

R5 Titanium Fairway is another Taylor Made golf club that has a titanium clubhead that is very easy to hit. It has permanent TLC cartridges that facilitate the launching of the ball high, long and straight for the players who would rather not change cartridges.

V Steel Fairway Woods claims its having the ultimate combination of power, accuracy and versatility. It is the Taylor Made golf club that attributes its excellence to its V-shaped sole that improves the force of how the sole interacts with the turf at impact.

Rescue Dual is a Taylor Made club that has double TLC ports that are widely spaced for increased forgiveness on incurring mis-hits. It has a new T-shaped sole that is responsible for the increased clubhead stability and decreased drag at impact that in turn promotes better accuracy and distance. With its low center of gravity (CG), it&’s a lot easier to launch than a long-iron and this makes shots higher and longer.

Rescue Dual TP, with dual TLC port and Taylor Made&’s movable weight technology,is best known to promote the variation of degrees of draw and fade. Further off, it makes for greater forgiveness. The difference between Rescue Dual and Rescue Dual TP is that TP has a higher center of gravity (CG) position that allows a lower, piercing ball flight that many experienced golf players find easier to manipulate.

Rescue Mid is said to be Taylor Made&’s breakthrough utility club that is engineered to be easier to use than a long-iron while displaying prowess in providing better distance. This golf club&’s excellent performance is from its way of uniting a high flash of inertia with a lower, deeper center of gravity. This creates maximum forgiveness on mishits, high launch angle and high spin for high, long shots that quickly stops.

Rescue Fairway is the Taylor Made golf club that indulges in its having a low profile that is responsible for its low and deep center of gravity (CG). It is made to smooth the progress of hitting the ball high, long and straight. This golf club is crafted with double sole that improves playability from a variety of lies. Taylor Made engineered it to launch a high angle with high spin for long-carrying shots that surely impress each player.

Choosing the right golf club is an extremely important part of improving how you play the game. If you are able to get golf clubs that work extremely well for your golfing style, you will notice an immediate improvement in your game. Usually beginner golfers don&’t put much thought into the clubs they use. Perhaps you have just been using your grandfather&’s old clubs that you dug up out of the attic, or maybe you bought some cheap clubs at a yard sale. If you ever want to be a serious golfer, you will need to buy clubs for yourself and choose some that will compliment your playing style. You can accomplish this by changing the shaft length, the head size, and many other details. One of the choices you will have to make is between graphite and steel, the two most popular materials. The one you choose can greatly affect your swing (or work with what you have already learned).

Steel is the cheapest choice of the two. Because of its lower price, many view it as inferior to graphite. However, this is not true at all. If you have a golfing style that works well with steel clubs, there is no reason to go for the more expensive graphite. Steel is much more durable, so you can expect steel clubs to have a longer lifespan than graphite clubs. Steel is heavier than graphite; some view this as a negative point, but some prefer to really feel the weight of the club as they swing it. Steel is also quite a bit stiffer than graphite (which has a higher flexibility). This is partially your personal preference, but your pre-developed swinging style may also tell you something that you wouldn&’t otherwise know. If you tend to have rather fast swings, you will want to stick with clubs that are stiffer. Steel offers this, but fast swings coupled with heavy clubs can be potentially dangerous, so make sure you always have a tight grip.

Graphite is the other choice, and it is best known for being a lighter and more flexible material. Again, this does not necessarily make it a better choice, since it all depends on what kind of golfing you do. If your strokes are a bit slower than average, a flexible graphite club could be the best choice. The flex of a club can be classified into 4 different ratings: Ladies, Regular, Senior, and Extra Stiff. Graphite clubs rarely fall under the Extra Stiff rating. If you feel that you need the extra stiff clubs, you would probably be better off with a steel club. The best thing you can do is to simply give a few test swings at the club store, and figure out what feels the most like what you have used in the past. Make sure it is something you could use for an entire game, and won&’t be come uncomfortable.

It&’s likely that you are feeling a little bit overwhelmed at making these important choices about your future clubs. This is normal for a beginner, especially since each of the materials has a lot to offer. If you really want to make sure that you make the right choice, you can get in touch with someone who is more experienced in picking out clubs. This might be a seasoned golfer or just a club store employee. Either way, they will be able to give you good advice simply by watching you swing at the ball a few times. The speed of your swing and several other things about your method will give them hints as to what you should choose. But as long as you think hard about your choice and then stick with it in the future, you should be able to choose clubs that are ideal for you, and are made out of a material that feels natural when you swing it.

Three Ways to Purchase Clone Golf Clubs

This article will discuss three ways to purchase clone golf clubs. The more money one is willing to pay, the less risk there is in obtaining a high quality set. Let&’s examine these three approaches.

Purchase Ready Built Clones

Of course you can go to one of many web sites selling clone golf clubs and simply make a purchase. These golf clubs often look like those from Calloway, Titleist, or other major brands, but they are substantially less expensive. This is the most risky alternative. If you pay $39 for a club that looks just like a brand name club priced at $169, are you getting the same thing? Was the club made in the same factory and on the same machinery as the brand name club or at another with equivalent quality? Was it manufactured using raw materials of the same quality and to the same tolerances? The chances of all that being the case are small. Let&’s examine this for a moment.

Outsourcing of Club Manufacturing

The vast majority of clubs sold by the major brands are outsourced to factories in low wage parts of the world. Of the less than 100 foundries in the world which make golf clubs, only a small number have the solid quality systems in place to interest the major brand golf club companies. The others produce clubs that sell for very low prices in department stores or low cost web sites, for example. They only survive because they can sell their output at low prices. So would it be a surprise if lower quality raw materials were used, like scrap metal instead of carbon steel? Could their machines hold the same tolerances as the quality foundries do? Can they afford to train their employees to the same level? Do they use the same quality golf shafts in their clubs? If they are selling low cost products on thin margins, they will probably cut corners wherever possible. Let&’s just put it this way: you are not going to get a $169 club for $39, no matter how much the two may be made to look the same.

Make Your Own Clubs

A less risky alternative is purchasing the components and assembling the clubs yourself. To end up with a higher quality product you need to be sure the heads are manufactured in a quality foundry. There are component suppliers who are reputable and who can prove they sell top quality parts. As for shafts, there is a large component market for shafts from the top companies like Aldila, Grafalloy or True Temper, among many others, who supply the major brand club companies as well. Quality grips are also readily available. Assembling clubs and grips is not that difficult. Golfsmith sells components and can instruct you how to do this. Not too many tools are required, and Golfsmith can also provide support at either their retail stores or on the phone. The main problem with this approach is that you need to know which components to purchase, which heads, what type of shaft, etc. This will be discussed in more detail below.

Every golfer’s physical capability and swing is distinctive. Many of today’s best golf clubs can be custom fit for lie angle, shaft type and length, grip type and size. Custom fitting golf clubs involves several easy measurements and a quick self-assessment of your game. This custom golf club has become more than a fad that even not so professional golfers test its waters.

Custom fitting is the process for tailoring a golf club to suit your personal swing.

Whatever your level, with a custom golf club the aim is to ensure that if you do make a good swing, the club will be square at impact and should produce a straight shot.

Custom Golf Club How To’s:

To custom fit your golf clubs, you need to know: your gender (male or female); your height in your stockings or socks; the distance from your wrist (where it bends) to the floor with your shoes off; your age; your handicap or skill level; how fast you swing a golf club; what club you use at the 150 yard marker.

Gender is used to put you into the correct fitting scale for custom golf clubs. The golf industry uses different definitions of “standard length” for men and women.

Your height and the distance in inches from your wrist to the floor are used together to determine the length of a custom golf club that is appropriate for you. The starting point for club length can vary up to 3 &’-inch ranging from ladies to men plus 1 &’-inch. A tall person with long arms can very easily require shorter clubs than an average height person with short arms. About 80 percent of golfers are standard length.

Your age, handicap (if you happen to have one), self-assessed skill level, estimated golf swing speed and club you use at the 150 yard marker are all combined to determined the custom golf club’s shaft flex that is appropriate for you.

Custom fitting can fix your slice. If you slice the ball it means that the toe of the club is leading into the ball which opens the face of the club. That may be down to a swing fault, but it could be because the club is too flat. So as part of the custom fitting process you can make the custom golf club more upright to help with this. This will mean that the toe of the club will be slightly off the ground at address to compensate.

There are different methods of fitting according to custom golf club manufacturers but ultimately they are all trying to improve your game. To begin with simple measurements such as wrist-to-floor, height and hand size are taken and will point you to the right size club and at what angle it should be to the ground. Then you will take a club and hit some balls. One method is to place impact tape on the bottom of the custom golf club and an impact board on the floor.

As you hit the ball the board will leave a mark on the tape showing whether the heel or the toe of the custom golf club is striking the floor first. The resulting mark will show whether the club face needs to be flatter or more upright. Then things get a bit more advanced. Analysis equipment can measure everything from your club speed to the side spin of the ball so that you can get maximum distance from your shot. You can also measure the launch angle of the ball, how much backspin you generate and impact efficiency – all which affect distance. The angle in which the custom golf club approaches the ball and the sidespin of it can help fix your game too.

Rather than bringing down your old clubs, it might be better to start from scratch. It’s a big misconception that custom fitting is only for good golfers. Anyone can benefit. That said, if you plan to upgrade a new set of clubs with the same manufacturer they may be able to adjust your old set to become custom golf clubs.

Custom fitting won’t cure all your bad shots. Coaching will sort that out. But if you do make a good swing, then the custom golf club will arrive correctly at impact and should produce a straight shot at your target. That alone will save shots during a round.

Lastly, custom fitting is often free of charge. But it is usually on the condition that you buy some clubs once you’ve been fitted. So it really depends on what your budget is. If you’re prepared to buy a new set of clubs it’s definitely worth getting fitted.

Golf is one of the most widely played sports in the world, and is enjoyed by millions. It allows you to get outside and get some fresh air and sun, while playing a game that requires lots of skill and prowess. When you start golfing, you will need some clubs to bring along with you. There are 14 clubs in a true set, but to start off with you only need about half of these. There are three main types of clubs, and these are irons, woods, and putters. By buying the right combination of these, you can be set for an entire game. However, to call them &’cheap&’ would be an utter lie. Golf clubs are very expensive. If you are not sure whether you are going to stick with the sport or not, it is probably a good idea to start with used golf clubs or otherwise cheap golf clubs.

Imagine all of the more hardcore golfers, and what their new equipment looks like. They probably replaced some perfectly good clubs just a few months ago in order to get the new and the best clubs. Few people really need this level of commitment to buying the new golf clubs all of the time, so you don&’t need to hold yourself to the same standards that they do. Instead, you can take advantage of their constant turnover rate of golf clubs. Just talk to one of these hardcore golfers, and find out about their old golf clubs. You may find out that they have dozens of old golf club sets stored away in their garage. You can either ask to borrow them for a long period of time, or simply buy them. You may find that they are happy to let you have the old golf clubs.

If you aren&’t fortunate enough to have this kind of contact, you can look in other venues for used golf clubs. Many golf club stores stock used clubs in their inventory at a highly discounted rate. However, oftentimes this is more expensive than the other choices. Look on eBay to find out the selling rates for the used golf clubs that you are wanting to buy. You may also be able to find golf clubs at yard sales, in classifieds listings, or on web sites like CraigsList.com. It is best to check all of these places before you buy golf clubs. You may find it one place for hundreds of dollars cheaper than it is at the other place.

Golf can be very hard on golf clubs, especially if you are a beginner with a penchant for smacking the ground with your club. If you buy new clubs and abuse them so thoroughly, you will likely be kicking yourself wishing that you hadn&’t spent so much money on them. This is another reason why it is good to stick with used clubs. When you break them, scuff them, or lose them, you won&’t feel too bad about it. You will find that many seasoned golf veterans are huge advocates of purchasing used clubs. If you buy used clubs rather than new clubs, you will likely have a much happier experience overall. Just be sure to buy your used golf clubs from somewhere that you can trust.

Ball position affects a clubhead&’s swing path, as I explain in my golf lessons. If the ball is too far back, the clubhead moves on an in-to-out swing path at impact, sending the ball to the target&’s right. If the ball is too far forward, the clubhead moves on an out-to-in swing path at impact, sending the ball to the target&’s left.

Correctly positioning the ball increases the clubhead&’s chances of meeting the ball at the correct angle of attack and on the right target path. It also helps eliminate a fade or hook, along with other swing adjustments.

Most teaching pros subscribe to the standard ball position theory as do most players and most professional golfers. This theory advocates changing the ball&’s position depending on the club used. If you&’ve taken golf lessons or read my golf tips, you&’re probably familiar with this theory.

For example, the ideal ball position for the driver is just inside the heel of your front foot. Placing the ball there ensures that the clubhead makes impact just beyond the swing&’s lowest point, with an upward, sweeping motion of the club&’the perfect swing for the being used.

The ideal position for long irons, on the other hand, is slightly back from the driver&’s position. The ideal position for mid-irons is one or two balls back from this position. And the ideal position for short irons is in the middle of your stance.

These positions place the ball at the lowest point in your swing, given the length of the club used and the type of swing taken. In addition, placing the ball at these positions enable the golfer to make clean contact with a crisp descending blow&’the key to hitting iron shots well.

Much golf instruction is built around the standard theory. But not every teaching pro advocates it. David Leadbetter, who&’s taught numerous pro golfers, like Nick Price, and written several books, offers another approach. It&’s one he stresses in his golf instruction books. Like the standard theory, it makes sense.

Leadbetter suggests that players with lower golf handicaps position the ball

(1) just inside the left heel for woods and
(2) two balls back for irons. For players with high golf handicaps, he suggests positioning the ball

(1) in the middle of their stances for irons and
(2) a ball or two forward from that position for woods.

His reasoning is logical. Players with low golf handicaps use their lower bodies more aggressively than players with high handicaps. Players with low golf handicaps are capable of taking advantage of a forward ball position. Players with high handicaps are not.

Golf legend Jack Nicklaus also offers a ball position theory, which he explains in his golf instruction books. It, too, make sense.

Nicklaus advocates a constant ball position, regardless of the club used. He believes that the ball opposite the left heel is the only spot where the club ever travels parallel to the target line.

Any other position towards the back foot means the ball is struck too early in the downswing.

Instead of re-positioning the ball, Nicholas favors changing your stance, depending on the club. Open your stance for the shorter irons, and pull the right foot back, to make the stance wider and squarer, as the club&’s shaft length increases. Winner of 18 majors, Nicholas has a theory that seems to work for him at least.

Another consideration with ball position is tee height. I tell players taking my golf lessons that the ball&’s equator should be even with the top of the driver when the ball is on the tee. Placing the ball higher enables the player to hit the ball on the upward arc of his/her swing. Players with oversize clubheads, then, need longer tees to reach the right height.

A third consideration with ball position is weather. If it&’s windy, tee the ball higher if you&’re hitting with the wind to generate loft. The added loft enables the wind can carry the ball farther.

Tee the ball lower if you&’re hitting against the wind to produce a low shot, like a line drive in baseball. This type of shot cuts through the wind and rolls farther than a shot with loft.

Regardless of which theory it is, find one that&’s right for you, just like Jack Nicklaus did. Test each theory out while on the practice range and under game conditions. Work on it until you find the ball position that&’s right for you. Then, use it every time you play.

Purchasing golf clubs is one of the most important things, if not the most important thing that you will ever have to do when it comes to playing golf. Your golf game is going to depend on the golf clubs that you choose to play with. Your swing is everything to your game and without the right golf clubs you will not be able to swing the right way.

When choosing the right golf clubs you need to take a good long look at the shaft. The flexibility of the shaft of any golf club is going to tell you a lot about the club. Not everyone is comfortable with the same amount of flexibility and you need to find the golf clubs that you are the most comfortable with. Try out many different flexibility levels to see what suits you the best. The golf stores will let you do this. Even if you plan to buy them for less online you can still visit a golf store to see how the golf clubs feel in your hands. I recommend everyone do this before they commit to any particular golf clubs.

While you are in the golf store get your swing measured. This will also help you to find the best possible golf clubs for your golf game.

Different golf clubs have different lengths and not all lengths suit all golfers. You need to check out the different lengths to see which will suit your body and your game the best. In most cases a standard length is the way to go but short people and tall people will need a different length when it comes to their golf clubs. You do not want to have to bend in order to hit the ball, the length of your golf clubs is another essential aspect to a good golf game.

You will also want to take into consideration your handicap in golf.

This too will have a bearing on the golf clubs that you should be choosing the next time you are in the market for new clubs.

Your ability in golf will have a direct bearing on your choice of golf clubs as well. There are golf clubs that are made for those just beginning to play golf and golf clubs made for pros. If you are just starting to play the game and you are not even sure that you are going to like it yet then you do not want to go out and spend hundreds or even thousands of dollars on your golf clubs do you? That would be crazy. What if you end up hating it? It is a far better idea to start out in a more affordable price range with your first golf clubs.

FT-Hybrids
These clubs fit into the Fusion Technology line in which different materials are fused together to alter the club head characteristics. In this way weight can be redistributed to achieve certain goals. More weight is placed around the periphery of the club to both lower the center of gravity (CG) and place it farther back in the club head. This makes for more forgiving off-center hits and allows the ball to get into the air easier. One distinguishing feature of the FT-Hybrid line is the opportunity to choose hybrids with a hook bias. This helps golfers who slice the ball most or all of the time to hit straighter shots. This is an option on some of the clubs offered and will be discussed in more detail shortly. Other distinguishing features in Callaway hybrid golf clubs are VFT and S2H2 technologies. VFT stands for Variable Face Technology, and this makes the face thicker in the center and creates more distance. S2H2 takes weight out of the hosel which is redistributed to the club head perimeter. S2H2 means short, straight, hollow, hosel. Five different clubs are available, 1-5H, although the 1H is not produced in a left-handed version. The draw bias option is available in the 2-4H clubs as is a neutral version. The 5H only comes in the draw option and thus there is no neutral version for that club. There are a number of standard graphite shafts to choose from, and of course the clubs can be made with steel shafts. The FT-Hybrid line is the most expensive, and the clubs retail for $179 with steel shafts and $199 with graphite.

X-Hybrids
The X-Hybrid product line is a bit less expensive, retailing for $139 with steel shafts and $159 with graphite. Both the VFT and S2H2 technologies described above are utilized in the X-Hybrids as well. These clubs also have a unique sole design which is meant to cut through tall grass in rough areas easier. The clubs also have perimeter weighting and a low and deep center of gravity. Four clubs are available, 2-5H, but the 5H is not made for lefties. A good selection of standard graphite shafts can be chosen from as well as a standard Callaway brand steel shaft.

Big Bertha Heavenwood Hybrids
These clubs are the least expensive in the Callaway hybrid golf clubs product line, selling for $99 with steel shafts and $129 with graphite. Some of the core Callaway technologies are in this clubs as well, like S2H2. The clubs use a modified War Bird sole and have an elongated and low-profile face which is said to inspire a confident feel. They also feature a high Moment of Inertia, which helps with off-center hits. There are a lot of clubs offered in this line, 1-7H, so one could eliminate most irons except for 8, 9 and wedges. Left handed versions are only available in 2-5H, however. Once again there are a half dozen standard graphite shafts to choose from, as well as a Callaway designed steel shaft.

It should be noted that all three members of the Callaway hybrid golf club product lines are available in women&’s versions. Of course there are differences from the men&’s offerings described above, and these can be easily seen by visiting the company&’s web site.